- Pune, Maharashtra
- GST NO. : 27AICPJ8016B1ZP
- +91-9890227232
Twitter1 piece (MOQ)
| Business Type | Manufacturer, Exporter, Supplier |
| Type | Integral / Remote Mounting |
| Enclosure | Aluminum Die-cast - for Amplifier / Transmitter |
| Dimensions | Head Mount: 100 mm (L) x 160 mm (W) x 80 mm (D) |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Product Details
Cable Entries
nos. for remote / integral Transmitter
Cable Glands
PG-7 [Standard]
Power Supply
110V/ 220 V AC 50 Hz S.P
Temperature
0—50 °C (Operating Ambient)
Temp. Drift
0.010 %/ °C
Humidity
90 % R.H. max. Non-condensing
Input
Micro-volt signal proportional to flow rate from Flow Tube
Outputs
4— 20 mA dc in max. 110 Ohms— Proportional (0 — 100 % flow rate)
Flow Rate Unit
m?/hr, LPH, LPM & LPS
Totalize Unit
Lit & m3
Min. Media
5 uSiemens / cm (Conductivity)
Coil Excitation
Pulsed DC
Accuracy
+ 1% (10 % to 90 % of calibrated range in ref. conditions
Ref. Conditions
Power supply nominal + 10% Temperature 27°C + 2°C
Repeatability
+ 0.2 % of reading
Ingress Protection
IP — 65 Equivalent
Brand Name
Brio Instruments
Brochure
ViewWe are leading manufacture for Electromagnetic flow meter in process control instrumentation; Maintenance free, low cost, highly stable, reliable & ideal flow meter suitable for wide ranges of pressure & temperature . The measurement being based on 'Faraday's law of electromagnetic induction' is independent of viscosity, density, pressure and temperature of the flowing media & measurement is a true volumetric. Current output of 4 – 20 mA DC is provided which is directly proportional to the instantaneous volumetric flow rate.
Advantages and Disadvantages:
- A magnetic flow meter provides an unobstructed flow path, with negligible pressure drop due to its pipe The typical accuracy for a magnetic flow meter is + 0.5 % of full scale. This is among the best of the various pipe flow meters.
- The effect of fluid viscosity on flow through a magnetic flow meter is essentially the same as for flow through the pipe itself.
- The magnetic flow meter can be used for pipe flow measurement of either clean or dirty liquids, including wastewater, corrosive liquids, or slurries.
Disadvantages of Meter:
- The magnetic flow meter is used primarily for liquids. It doesn't work well for measurement of gas flow rate.
- In order to use a magnetic flow meter for measurement of a liquid's flow rate, that liquid must be conductive.
Looking for "Electromagnetic Flow Meter" ?
piece
